2010 RTi-International 7400 SFA 4X2

2010 Diamond SPEC™ 7400 SFA 4X2 (SA525)

Model Profile

Minimize
MISSION Requested GVWR:35000. Calc. GVWR: 41980
DIMENSION Wheelbase: 185.00, CA 155.00", Axle to Frame End: 57.00
ENGINE, DIESEL {International MaxxForce DT) 300 HP, 860 lb-ft Torque @ 1400 RPM, 2400 RPM Governed Speed, #2 Bell Housing
TRANSMISSION, AUTOMATIC {Allison 3500_RDS_P} 4th Generation Controls; Wide Ratio, 6-Speed, with Double Overdrive; Refuse/Mixer; Includes Oil Level Sensor, with PTO Provision, Less Retarder, with 60,000-lb GVW Max.
CLUTCH Omit Item (Clutch & Control)
AXLE, FRONT NON-DRIVING {Dana Spicer I-120W} Wide Track, I-Beam Type, 20,000-lb Capacity
AXLE, REAR, SINGLE {Meritor RS-30-185} Single Reduction, Standard Track, 30,000-lb Capacity, with "T" Wheel Ends Gear Ratio: 6.83
CAB RTi Cabover, Low Forward
TIRE, FRONT (2) 315/80R22.5 XZY-3 (MICHELIN) 486 rev/mile, load range L, 20 ply
TIRE, REAR (4) 11R22.5 XDE M/S (MICHELIN) 497 rev/mile, load range h, 16 ply
SUSPENSION, RR, SPRING, SINGLE Vari-Rate; 31,000-lb capacity, with 4500 lb Auxiliary Rubber Spring
FRAME REINFORCEMENT Outer "C" Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813" x 3.892" x 0.312";
PAINT Cab Schematic 100GM, Location 1: 9219, Winter White (Std)Chassis Schematic N/A
Print  

RTi CAB/OVER vs. Conventional

Minimize
INCREASED TURNINGINCREASED PAYLOADINCREASED VISIBILITY
Radius to Curb 29'6"Weight Front Axle 30% More To Ground Level 5’6" from Bumper

See Chassis Specifications

INTERNATIONAL*

Print  

To view Vehicle Specifications, login with "Dealer" user name and password.




  |  Login